| |
DAC587 > FBB 07.09.08 17:27l 126 Lines 4144 Bytes #999 (0) @ WW
BID : 504_DBX587
Read: GAST
Subj: Doku WinFbb_7.01_alpha with AGW and Xglue on Xnet
Path: FFLB0X<DBX314<DBO274<BB1BOX<AP1BOX<DBX587
Sent: 080907/1106Z @:DBX587.#HEI.SLH.DEU.EU #:504 [505] FBB7.01.35 alpha
From: DAC587@DBX587.#HEI.SLH.DEU.EU
To : FBB@WW
So people love it is I have done so some time ago in advance of
WinFbb_7.01_Alpha for the WINXP now, I have written about this one
Written documentation to find the forum to www.dnx587.dyndns.org under
everything about Packet Radio :-)
Here are the Dokumtation for the PR Network
Since I have some have wondered what Boxsoftware For a ride or what the
for a WinFbb version is and where and how to you, I will Installs
ne little time here to write instructions
First and foremost this is the version WinFbb_7.01_Alpha
together with Xnet on a computer under WinXp!
But now to install and what you needed
1) First you have your WinFbb the setup file download the whole
Of course you can download here WinFbb_7.01_20_setup.exe
After the file you've loaded down for them and Installs
the WinFbb to c: \ WinFbb \
And the computer starts gebenfalls new!
after you've done your invites you the file
WinFbb_7.01_Alpha_35.zip down to find WinFbb_7.01_Alpha_35.zip
After this is done, you unpacked the files in the Zip folder where
are in c: \ WinFbb and then replaced the files or overrides
existing files
Prima where we have managed
Now we have the zip folder Drivers.zip herrunter listed here
Drivers.zip for WinFbb_7.01_Alpha
After downloading the contents of your unpacked in c: \ WinFbb and replaced
there
Files
Now we only have a folder so that we can start finally WinFbb
and now you have the folder so that your download Sprachen.zip
Box also can speak German
To find Sprachen.zip
After downloading the contents of your unpacked in c: \ WinFbb \ Config and
there will override the existing files
So now you have the geschaft WinFbb should now be run but before
Your FBB the start you still have to execute the WinFbbcfg.exe be found in
c: \ WinFbb there because all the settings you have made from
WINFBB 7.00 times respects but it knows that when you register your
H-route it is a # # also z.B HEI. ETC
And ports have your AGW indicate very IMPORTANT
The rest should by itself but you should ask
you can have love it here in the forum your questions!
So now but to point
2) installation of AGW and Xglue
The first invites you to zip your folder AGW.Zip herrunter listed here
AGW.Zip
After downloading the contents of your unpacked in c:
In AGW have to adjust your nothing more that I was already preset
So now it continues now invites you to your folder Xglue.zip down to
find Xglue.zip
After downloading the contents of your unpacked in c:
after this is done, now comes the important part and that is now your
in the folder c: \ Xglue and searches there xglue.ini the file and opens it
with
an editor and then you see the bottom lines because 2 and
[XNET.PORT]
2 = 1,5722,5721
Where the two numbers are 5722 and 5721 are the ports in your
Xnet must also register that is in your Xnet makes the following Register
att ip2 axudp 2 1 l5721 d5722 127.0.0.1
att with IP and port of you are free Selectable because I do not
Xnet port for which you still free
So now we have it now, we'll see whether the whole
history also runs but before we will check whether your following folders
when you have
1st c: \ AGW
2nd c: \ WinFbb
3rd c: \ Xglue
Should this be the case until then you have done everything correctly and you
can
now try to start the matters
First, your Xnet, then you go in and starts Ordener AGW
AGW there when this happened, your in the folder and starts Xglue
there Xglue
So now comes the part but what we and help on the WINFBB
Now, your in the folder c: \ WinFbb and starts where you have WinFbb.exe
done everything right should now run the FBB and everything is good and your
can forward the files etc should establish this is not the case
is what went wrong somewhere
In this case, your problem here into the forum and I will try
whether we get the problem solved
I hope that I have with this documentary could help and now much fun
the common hobby!
Your webmaster and the sysop DBO587
PS: The files will get in your www.dnx587.dyndns.org under Packet Radio
Lese vorherige Mail | Lese naechste Mail
| |
